Mass Air Flow Sensor For Vauxhall Insignia B Antara A Chevrolet Captiva 22752508

Check part compatibility by using our vehicle filter options below. If you find your car, this part is compatible.

Is your Vauxhall Antara or Insignia suffering from a rough idle or sudden poor MPG?

Stop settling for sluggish performance and finally clear that persistent Check Engine Light by replacing your faulty unit with the exact-fit, high-quality Mass Air Flow Sensor (MAF) 22752508. This essential sensor restores your engine's precise air-fuel mixture, delivering back the smooth power and fuel efficiency your Vauxhall was built to have.

OEM Number: 7926/AFH70M-101, 227525087720, 0986JG1625, FLOW251N, CSM6972, 22752508, 135054, AFH70M101, 2505054, 04819491, 4819491,

Fitting Position : Air Filter Housing

Number Of Pins : 5-Pin Connector

Plug Type : Male

Voltage : 12 V

Quantity : 1

Our SKU: TVAU22752508_313
 
All our Mass Air Flow Sensor For Vauxhall Insignia B Antara A Chevrolet Captiva 22752508 are OEM quality and reliable after market car parts. This Mass Air Flow Sensor For Vauxhall Insignia B Antara A Chevrolet Captiva 22752508 is specifically compatible with Chevrolet: Captiva, Opel: Antara, Insignia, Vauxhall: Antara, Insignia, .

Please use our make-model-year tool to check this part's compatibility with your vehicle. However, please note that our tool is for reference only and we recommend that you check the part number on your old unit prior to purchasing.

If you are still not sure about the compatibility of this part to your vehicle, please supply us with the VIN number or Reg number in our live chat or contact form! You can also find details on our purchasing & shipping guide here.

FAQs - Mass Air Flow Sensor 22752508

Q1: What is the purpose of the Mass Air Flow Sensor 22752508?
A1: This sensor measures the mass (volume and density) of air entering the engine. The engine control unit (ECU) uses that data to calibrate the fuel injection and maintain optimal air‑fuel ratio. Without accurate measurements, the engine may run lean or rich, leading to performance issues.

Q2: Which vehicle models is the 22752508 MAF sensor compatible with?
A2: It fits several models including Vauxhall Antara (2.2 CDTi) and Vauxhall / Opel Insignia in relevant diesel variants.
It also corresponds to OEM references like AFH70M‑101.
Be sure to cross‑check with your vehicle’s engine code, production year, and existing part number before purchasing.

Q3: What are the OEM / equivalent part numbers for this sensor?
A3: Some of the referenced numbers include 22752508, AFH70M‑101, 48 19 491 (for Opel/Vauxhall)
Also, aftermarket part Bosch 0986JG1625 is cited as an equivalent option.

Q4: How many pins does the connector have and what type is it?
A4: This MAF sensor uses a 5‑pin connector.
When purchasing, ensure your vehicle’s MAF connector matches this pin layout.

Q5: What are the signs of a failing 22752508 MAF sensor?
A5: Common symptoms include:

• Poor fuel efficiency

• Rough idling or stalling

• Hesitation or stumbling during acceleration

• Illumination of the Check Engine Light

• Black smoke from the exhaust

These are generalized signs of MAF sensor failure (not specific to 22752508) but helpful for diagnosis.

Q6: Can I clean the sensor instead of replacing it?
A6: Sometimes mild deposits or dirt on the hot wire can cause erratic readings, and cleaning with a purpose‑made MAF cleaner can help. However, often the underlying fault is more serious (electrical, wiring, or sensor degradation) and replacement is the reliable remedy.

Q7: How to verify fitment before ordering?
A7:

1. Check the original MAF sensor’s part number on your vehicle.

2. Match your vehicle’s make, model, engine type/year with the product listing.

3. Provide the last few digits of your VIN/chassis number to the seller for confirmation if in doubt.

4. Confirm connector type and pin count (5‑pins in this case).

Q8: What warranty or return policy does this product have?
A8: All products are protected by a upto 10 year worry-free warranty depending on Part. Please Read our Warranty Policy.

Q9: How should I install this MAF sensor properly?
A9:

• Disconnect the negative battery terminal before working.

• Remove the old sensor carefully (avoid damaging the airflow tube).

• Clean the airbox and inlet duct (replace air filter if needed) so no debris gets into the engine.

• Install the new sensor in the correct orientation (match airflow direction).

• Secure the electrical connector firmly.

• Clear error codes via OBD or ECU reset (some systems may auto‑detect).

Q10: What if I receive a defective or incorrect sensor?
A10: Immediately document the problem (photos, model numbers) and contact us. Do not install a defective sensor. we will replace or refund if the part is unused and within the return window.

1. Standard Shipping (Free) - Please allow 1-3 days for your order to be delivered 
2. DPD Next Day (£4.99) - Please place orders between Monday - Thursday before 4 PM UK time. This service applies to UK Mainland orders only.
3. Royal Mail Special Special Saturday Delivery (£19) - Please place orders between Monday - Friday before 3 PM UK time. 
4. International - Rates vary based on product size. Please enquire for further details. 

We do not provide any guarantees on shipping times, as we are reliant on 3rd parties. However, we strive to ensure that our customers are always satisfied.

All products are protected by a upto 10 year worry-free warranty depending on Part 

Warranty Coverage: In case a purchased product becomes faulty during its warranty period, for reasons unrelated to your acts, omissions or misuse of the goods, you must promptly notify us and fill out a warranty claim form. 

Warranty Non-Coverage: We do not have any liability for any defect arising from normal wear & tear, wilful damage, negligence, tampering of the goods, incorrect fitting of the goods by you and/or a third party. We are also not liable for any abnormal working conditions, alteration or repair of the goods or a failure to follow goods manufacturers' instructions (whether oral or in writing) 

We have a 180-day return policy, which means you have 180 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, unused, and in its original packaging. You will also need the receipt or proof of purchase. 

For All Return buyers pay Return Postage.Returns will only be processed after we receive the approved part and a member of our team fully inspects the returned item & successfully matches the returned part to the return reason. 

For All UK orders, we offer free return. We do not offer any reimbursement of shipping costs for Any orders on original sale like Next Day Postage. 

For All Outside UK order  We do not offer any reimbursement of shipping costs for Any orders on either the original sale or the return. 

Please direct all questions to sales@d2pautoparts.com. 

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exchanges 

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund.